Why is my network not displaying water balance insights?
If you have delimited zones but you are not seeing any insights about water balance, it’s probably because your network is missing some data.
Check your network includes the following data.
Network requirements
Net flow
Inlet/outlet sensors readings (athough we'll also display net flow data from the simulation)
Efficiency
Inlet/outlet flow sensors
Live demands for all the customer points
Estimated leakage
Zone inlets/outlets (minimum one zone with at least one inlet), defined according to the our guidelines.
Live data for all zone inlets/outlets (at least for a 24h period with a resolution of at least 1hr). Alternatively, you could upload a INP network model with calibrated demands (i.e. EPS model with calibrated demand patterns for demand nodes).
A measurement (or estimation) of the legitimate water consumption within each zone at the time of minimum night flow (MNF). This consumption value will be used to calculate a consumption factor for estimating leakage at the time of MNF. The higher the accuracy of this value, the higher the accuracy of the estimated leakage will be.