The following panels allow you to have an overview of your network performance regarding: pressures, flow, tank autonomy, zones, water age and model deviation. You can also check these panels when performing scenarios to asses the impact on the network.
Pressures
Use the Pressure panel button to display or hide the Pressure panel. Switch ON and OFF the toggle bar, to activate
or hide
the pressure results on the map.
You can navigate to the minimum and maximum pressures in the customer points by clicking on the hexagons in the panel. And filter by pressure range using the colored squares.
- Pressure range selector
- Go to minimum pressures
- Go to maximum pressures
- Customer points with pressures within the selected range
Flow
To display or hide the Flow panel, use the Flow panel button. Switch ON and OFF the toggle bar to activate
or hide
flow on the map.
Use the assistant’s chat to ask me what’s the flow distribution in your network. I’ll give you all the details so you don’t even have to open the panel.
Tank autonomy
| Available on |
|
The Tank Autonomy panel allows you to visualize an estimation of the hours your tanks will supply the network, allowing you to be prepared for any incident. You can verify the behavior of your tanks throughout the day moving along the timeline.
Did you know you can ask me about the autonomy of your tanks? Open the assistant and try it out: Hey Q, is there any tank with lower than x autonomy? Or: What's the autonomy of Picnicbay_SR?
If the Tank Autonomy plugin is not available on your subscription, you can buy it from the Marketplace or upgrade your plan.
Zones
| Available on |
|
If your network includes zones, you can also use the Zones panel to hide or show the zones layer on the map, or to see more information about your zones.
Ask me any information you need about your zones. I’ll help you locate the DMA of your choice and select it to display the popover. I can also share with you information like the net flow in the zone, the location of its inlet, etc.
Water age
| Available on |
|
The Water age panel is a plugin available in the Qatium Marketplace. It helps you monitor water quality across your distribution network by tracking water age — a key indicator of water quality.
Click on the Water age button to open the panel and switch the toggle ON . You will see different colors on the map indicating water age in your network.
Click on the colored squares to select a specific time range and focus on areas where water has been in the network the longest.
If the Water age plugin is not available on your subscription, you can buy it from the Marketplace or upgrade your plan.
Model deviation
If your network includes live data, you can check the elements and the overall deviation of your simulated network in the Model deviation panel .
Switch ON and OFF the toggle button to activate or hide
deviations on the map. When the toggle is ON, the icons of the elements on the map will be highlighted in green (low deviation), orange (medium deviation) or red (high deviation).
If you prefer, I can interact with the deviation panel for you. Just ask me about the network average error; or about flow, pressure and tank volume in particular. I’ll give you all the details and fly you to the most deviated elements.